Industry standard depth transducer with 200kHz frequency. 12 tilt to the element for deadrise compensation.Inside the housing, the ceramic element is tilted for built-in deadrise compensation. The resulting vertical beam gives excellent echo returns for more accurate depth readings. The P19 with 12 tilt has been the industry standard for many years — the choice when the hull's deadrise angle is 8 to 15. All versions have a nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull.For echoMAP 50s and 70s, 50dv, 70dv, 800xs Series, 1000xs Series. Transducer kit comes with installation instructions. 8-pin configuration.Key FeaturesIdeal depth-only transducer for low-power fishfindersDesigned for use on fiberglass and wood boat types, power and sailNearly flush housing minimizes drag with only 3/16" protruding outside of hullCeramic element inside housing is tilted 12for built-in deadrise compensation – 12 version ideal choice for 8 to 15hull deadrise anglesRight-angle cable exit offers low headroom and protection when transducer is stepped onRubber washer (included) allows tightening of hull nut to irregular hull surfacesHousing is ABYC H-27 compliantSuitable for cruising powerboats and sailboats up to 30' in lengthSpecificationsStyle: Thru-hullCable Length: 45'Connector: 8-pinMonitors: Depth and TemperatureMaterial: PlasticTransmit Power: 350W (RMS)Frequency: 200 kHzMax. Depth: 700'Acoustic Window Material: UrethaneCompatible Hull Materials: Fiberglass or woodHole Diameter for Installation: 2"Beamwidths: 11Hull Deadrise Angle: 12 compensation for hull deadrises of 8to 15